Please be sure to do careful/comprehensive/strict test confirmation and aging test and high and low temperature test.
What we can ensure is that the goods are consistent with the samples.
If the customer finds this problem and that problem during mass production,
But our batch of goods and samples are consistent,
It was a problem caused by the customer engineer's failure to test and confirm carefully/comprehensively/strictly, and the customer should bear the responsibility and loss.
If it is determined that the problem is caused by the inconsistency between our products and samples,
The replacement of reasonable labor costs, our company can bear.
In short: our company can only bear the loss of the value of the goods themselves and the reasonable labor hours generated by the replacement of goods, other additional punitive damages and joint liability our company can not bear.
Normal production loss is the production loss caused by transportation/static electricity/too high temperature tin furnace and other reasons in the production process, if the defective rate is not high, within 0.3-0.5%, it is normal production loss, our company will not do the analysis of bad products, according to 1:1 replacement.